The right cage is the longest one that fits your space with room to walk around it. Here is how to work it out before you order.
1. Measure the clear space
Measure the flattest strip of lawn or floor you have: length, width and — for barns and shops — ceiling height. Look up as well as down: tree branches, power lines and roof eaves all count. Mark the corners with stakes or cones and walk the outline.
Leave about 2 ft of clearance on every side of the frame so you can reach the anchors and tie the net, and keep the cage away from windows, fences and paths where a ball could escape if the net is left open.
2. Match the length to how you will use it
| Cage | Footprint incl. clearance | Best for |
|---|---|---|
| 40 × 12 × 10 ft | about 44 × 16 ft | Tee work, soft toss and short front toss; barns and large shops |
| 55 × 14 × 12 ft | about 59 × 18 ft | Front toss and pitching-machine work for most ages |
| 70 × 14 × 12 ft | about 74 × 18 ft | Close to full pitching distance for older players; room for a screen and a hitter |
For reference, the pitching distance is 46 ft in many youth leagues, 60 ft 6 in for high school and adult baseball, and 35–43 ft in fastpitch softball. A cage a few feet longer than the distance you plan to throw gives the batter and the screen room to stand.
3. Width and height
A 12 ft wide cage is enough for one hitter; 14 ft gives room to swing comfortably and for a coach to stand beside the plate. Height matters most for pop-ups and for keeping the top net off the hitter's head — 12 ft is comfortable for teens and adults.
4. Ground and anchoring
Level ground makes setup much easier. On soil, the corner kit's ground poles anchor the uprights; on concrete or a barn floor, plan base plates or weighted bases instead. Tie the bottom tails of the net down or weigh them with a chain so balls do not roll under.
Ready to choose?
See our batting cage nets and corner kits, or email us your measurements and we will suggest a size.